1 Manual Helms: 11 Models Displacements 1.1 to 10.0 Cu Inch / rev ( 20 to 165 cc / rev )
2 FPS Helms: Two Series Standard Helm Series ( behind the dash mount ) 8 Displacements: 3.0 to 19.2 Cu Inch / rev ( 50 to 315 cc / rev )
Mini Helm Series ( front and/or behind the dash mount ) 5 Displacements: 2.0 to 4.9 Cu Inch / rev ( 32 to 80 cc / rev )
3 Electronic Helm: 5 Models Total turns 3 HO / HO, ( up to 9 plus steering stations )
4 Cylinders: 30 plus, Models Steering Torques 290 to 39,800 Ft Lbs (40 to 5500 KgM ) Volumes 4.15 to 149.1 Cu Inch ( 68 to 2444 cc ) Bores 1.0 to 4.0 Inch ( 25.4 to 101.6 mm ) Strokes 8.0 to 16.0 Inch ( 203 to 406.4 mm )
5 Hydraulic Pump Sets: 6 standard packs, multi combinations Volumes 1.13 to 4.0 GPM ( 4300 to 15,000 cc / min ) Custom designs to 96 GPM Electric Voltage 12 & 24 Volt / dc, 220/240, 380/415 Volt ac ( Specify: 50 or 60 Hz ) Electric Motors HP motors to Suit.
6 Hoses and Fittings for Bleeding T Fitting Nylon Tube Marine Steering Hose ( Parker ) Stainless Steel Braided Hydraulic Hose
HYDRIVE
design and manufacture and a full range of marine steering components
that are assemble into Marine Steering Systems to meet and exceed the
steering torques required to maintain safe control of the vessels
through the intended operational envelope.
A summery of the range of models are listed in the main steering component groups as follows:- 1 Steering Helm Controls 2 Steering Cylinders 3 Hydraulic Power Packs
STANDARD MANUAL HELM
MODEL 401 & 402 ( 1.7 & 2.0 cu in ) ( 28 & 35 cc )
Model 401 Helm is the "standard" helm for all OB & IB Kits ( 101 & 102 helms
on request )
MANUAL HELMS
BCB MP Series: ( 20,32,40,50,63,80 cc/rev )
Admiral HP Series: 101 & 102 (28 & 35 cc/rev)
Admiral HD HP Series: Model:103,104,105,106,107 ( 35,43,86,125,165 cc/rev )
( 1 cu inch = 16.38 c.c. )
FPS HELMS
Standard Helm Series: Tilt & Straight columns ( Behind the Dash Mount )
50, 80, 100, 125, 160, 200, 250, 315 cc/rev.
( 1 cu inch = 16.38
c.c. )
FPS HELMS Mini Helm Series: Straight Column ( Front & Behind Dash )
32, 40, 50, 63, 80 cc/rev
( 1 cu inch = 16.38 c.c. )
ELECTRONIC HELM ( Fly-By-Wire ) MODEL ES 801
E SERIES COMMANDER 3 Turns HO/HO w/- adjustable shaft brake
CYLINDERS ARE SOLID BRASS / HEAVY CHROME & ELECTRO-NICKEL PLATED,
STAINLESS STEEL ROD & BRONZE CASTINGS.
Cylinders: Steering Torques 290 to 39,800 Ft Lbs (40 to 5,500 KgM ) Volumes 4.15 to 149.1 Cu Inch ( 68 to 2444 cc ) Bores 1.0 to 4.0 Inch ( 25.4 to 101.6 mm ) Strokes 8.0 to 16.0 Inch ( 203 to 406.4 mm )
STANDARD FRONT MOUNT CYLINDER for OUTBOARDS
211 BH
NOTE: Cylinder drag link bars to fit: Honda Mercury OMC Suzuki Yamaha
OUTBOARD MOTOR CYLINDERS ( up to single 400 HP )
Models: 210 BH HP 210 BH HP XT 210 DE 210 T 210 TSE
211 BH
212 T
216 FM
411 BH
HIGH PERFORMANCE CYLINDERS
DUAL,TRIPLE,QUAD PLUS OUTBOARD MOTORS ( to 2,000 HP total )
210 BH HP XT Cylinders Solid brass/Chrome Plated ( Left & Right Hand )
Cylinder Bore: Inch 1.50, 1.75, 2.00, 2.50, 3.00, 4.00. Cylinder Stroke: Inch 9, 10, 12, 15,
Single Ended (unbalanced) Cylinders on request
HD 300, 400 SERIES electro-nickel plated & polyurethane coated Bore: Stroke: 2.5 in 12 in 3.0 16 4.0
EN SERIES BORE: STROKE 2.5 in 12 in 3.0 16 4.0
DUAL CYLINDERS 36,000 Ft / Lbs ( 5 Tonne / Metre )
Dual RE- Series Cylinders 4.00 Inch X 16 Inch Stroke Double Plate / Push-Pull Tiller Arms
Hydraulic Pump Sets: Volumes 1.13 to 4.0 GPM ( 4300 to 15,000 cc / min ) Electric Voltage 12 & 24 Volt / dc, 220/240, 380/415 Volt ac ( Specify: 50 or 60 Hz ) Electric Motors HP motors to Suit.
Several model "standard" Power Packs are available, a few models shown below.
Hydrive Engineering offers custom designed units & have manufactured / supplied hydraulic pump sets with output flows of up to 95 GPM & 75 HP electric motors.
PACK: FPS PUMPSET ( For multi engine outboards & inboards )
CONSTANT RUNNING 12 Volt dc Max Pressure: 1000 psi Max Flow: 4300 cc/min Auto "sleep / run" mode Amp overload protected "on / off " circuit wire Pressure relief valve With bracket With fittings Self cooling Dip stick
FPS PUMP SET Constant running 12 Volt dc
Left Unit: FPS Standard Unit with Bracket
Right Unit: FPS Standard Unit with Bracket and Autopilot Ready ( Dual Solenoids )
PACK: 5000 SERIES DC POWER PACKS
Available with: 24 Volt dc, Single and dual Electric Motors. 25 liter self cooling tank. Chromate
converted, two pack polyurethane coated, Hydraulic pump to
suit, high temp alarm sensor, low level alarm
sensor soft solenoid control, pressure relief
valve, low pressure sensor, pressure
sight gauge, sight level gauge, return
line filter, filler breather,
PACK 1 to 4
Available with: 220/240, 380/415 Volt ac, Single Electric Motors. 25 liter self cooling tank. Chromate
converted, two pack polyurethane coated, Hydraulic pump to
suit, high temp alarm sensor, low level alarm
sensor soft solenoid control, pressure relief
valve, low pressure sensor, pressure
sight gauge, sight level gauge, return
line filter, filler breather,
PACK 6 to 7 vessels to 200 ft plus (Large 'Standard' Pack )
Available with: 220/240, 380/415 Volt ac Single and Dual Electric Motors. 100 liter self cooling tank. Chromate converted, two pack polyurethane coated, Hydraulic pump to suit, high temp alarm sensor, low level alarm sensor soft solenoid control, pressure relief valve, low pressure sensor, pressure sight gauge, sight level gauge, return line filter, filler breather,